Torque hinges made of zinc, aluminum or stainless steel

Metal Position Hinges

  • Constant torque
  • Corrosion resistant versions
  • Lifetime up to 50000 cycles
  • Holding torque up to 11.3Nm
  • Description
  • Good to know

  • Downloads

The metal friction hinges have a constant torque over the entire adjustment range. Thanks to the patented ReellTorq® clip technology, these friction hinges are very supple and extremely low-wear. They are also very robust and available in zinc, aluminum or, for hygienic and corrosion-resistant applications, stainless steel. The metal friction hinges are available with both symmetrical or asymmetrical torque profiles, as well as single acting forward or single acting reverse. The torque hinges are ideal for holding doors, covers, screens and hatches stably in position while making position adjustments easily and intuitively.

Can I get a friction hinge with a different mounting configuration?
Many manufacturers, including Reell, are able to produce custom configurations for mounting. The additional cost of a custom design must be considered.

Can I get a friction hinge with detent stops?
We are not aware of any standard friction hinges that currently offer this feature. Reell has developed custom applications with the detent feature in a friction hinge.

Are friction hinges available with lift assist?
Reell can provide this feature in a custom friction hinge application.

Are corrosion resistant friction hinges available?
We are aware of one manufacturer that offers an all-plastic adjustable torque hinge. In general, most hinges have internal steel shafts and torque engines that are greased and must be sealed to prevent corrosion. Currently, Reell offers a number of products with o-ring seals to provide weatherproofing. This provides limited protection in an outdoor application but is not suitable for applications requiring submersion in fluids.

Are friction hinges available with different torques in opposite directions?
Yes. Reell is among several companies that offer products with differential torque between directions.

Are friction hinges available with adjustable torque?
Several manufacturers offer friction hinges with adjustable torque. Reell does not currently offer a hinge with this feature.

Are friction hinges available that lock in place?
We are not aware of any standard products with this capability. Reell can provide this feature in a custom hinge application.

Are friction hinges available with a hollow shaft to allow wires or cable to pass through?
There is one manufacturer we know of that offers this feature in a standard product. Reell has designed this feature into custom applications.

Is there such a thing as a friction hinge that will allow you to remove one half from the other and reassemble it later? (Example: Remove a door from a cabinet and put it back together without removing the fasteners.)
We are aware of this feature in a non-friction hinge but not in a friction hinge. Reell can provide this feature in a custom hinge application.

If I need fewer cycles (life) in a friction hinge, can I get a lower price?
Most manufacturers, including Reell, do not offer this flexibility. Reell friction hinges are based on a technology that provides consistent torque over the life of the product. We cannot adjust the life performance of this technology without adversely affecting the torque consistency over that life.

What is the operating temperature range for friction hinges?
Torque specs are for 20°C testing. Hinges are likely to pass life tests with a limited portion of cycles performed from -40°C to 80°C, but normally will require moderate additional high side torque tolerance at temperature extremes.

Article No. Range of motion Torque Lifetime Finish Feature/Option Images 3D Data sheet Enquiry Wishlist
PHC 270° 0Nm-2.79Nm 50000 cycles Plain zinc, black Symmetric Enquiry Enquiry
PHCA 270° 0.44Nm-2.79Nm 50000 cycles Aluminium Symmetric Enquiry Enquiry
PHCS 270° 0.44Nm-2.79Nm 50000 cycles Stainless steel Symmetric Enquiry Enquiry
PHL 270° 0.9Nm-3.4Nm 50000 cycles Plain zinc, black Symmetric Enquiry Enquiry
PH35 270° 5.65Nm-11.3Nm 20000 cycles Zinc black One-way forward or reverse Enquiry Enquiry